Transportation

Official: Train Brake Automatically Activated in Fatal Wreck

By Haven Daley, Michael Balsamo Dec 20, 2017 3:50pm

by Haven Daley and Michael Balsamo, The Associated Press, December 20, 2017

DUPONT, Wash. (AP) — Investigators are looking into whether the Amtrak engineer whose speeding train plunged off an overpass, killing at least three people, was distracted by the presence of an employee-in-training next to him in the locomotive, a federal official said Tuesday.

The official, who was not authorized to discuss the matter publicly and spoke on condition of anonymity, said investigators want to know whether the engineer lost "situational awareness" because of the second person in the cab.

Preliminary information indicated that the emergency brake on the Amtrak train that derailed in Washington state went off automatically and was not manually activated by the engineer, National Transportation Safety Board member Bella Dinh-Zarr said.

The train was hurtling at 80 mph (129 kph) in a 30 mph (48 kph) zone Monday morning when it ran off the rails along a curve south of Seattle, sending some of its cars plummeting onto an interstate highway below, Dinh-Zarr said, citing data from the locomotive's event recorder.

Skid marks — so-called "witness marks" — from the train's wheels show where it left the track, she added.

Dinh-Zarr said it is not yet known what caused the train to derail and that it was too early in the investigation to conclude why it was going so fast.

Investigators will talk to the engineer and other crew members and review the event data record from the lead locomotive as well as an identical device from the rear engine, which has already been studied. Investigators are also trying to get images from two on-board cameras that were damaged in the crash, she said.

There were two people in the cab of the train at the time of the crash, the engineer and an in-training conductor who was familiarizing himself with the route, Dinh-Zarr said. A second conductor was in the passenger cabin at the time of the crash, which is also part of the job responsibility, she said.

In previous wrecks, investigators looked at whether the engineer was distracted or incapacitated. It is standard procedure in a crash investigation to test the engineer for alcohol or drugs and check to determine whether he or she was using a cellphone, something that is prohibited while the train is running.

The engineer, whose name was not released, was bleeding from the head after the crash and his eyes were swollen shut, according to radio transmissions from a crew member.

The train, with 85 passengers and crew members, was making the inaugural run along a fast new bypass route that was created by refurbishing freight tracks alongside Interstate 5. The 15-mile, $180.7 million project was aimed at speeding up service by bypassing a route with a number of curves, single-track tunnels and freight traffic.

Investigators were also looking into what training was required of the engineer and other crew members to operate on the new route, said Ted Turpin, the lead NTSB investigator of the crash. That includes assessing the training process and how much time the workers were required to spend on the trains before they shuttled passengers, he said.

"Under Amtrak policy he couldn't run this train without being qualified and running this train previously," Turpin said of the engineer.

At least some of the crew had been doing runs on the route for two weeks prior to the crash, including a Friday ride-along for local dignitaries, Dinh-Zarr added.

The bypass underwent testing by Sound Transit and Amtrak beginning in January and at least until July, according to documents on the Washington Department of Transportation website.

Positive train control — technology that can automatically slow or stop a speeding train — was not in use on that stretch of track. Track sensors and other PTC components have been installed, but the system is not expected to be completed until the spring, transit officials said.

Regulators have been pressing railroads for years to install such technology, and some have done so, but the deadline has been extended repeatedly at the industry's request and is now set for the end of 2018.

Dinh-Zarr said it was too early in the investigation to say whether positive train control would have prevented Monday's tragedy.

In addition to those killed, more than 70 people were injured. As of Tuesday, 35 were still hospitalized, including 21 in critical or serious condition.

Two of the dead were identified as train buffs and members of the rail advocacy group All Aboard Washington and were excited to be on board for the inaugural run: Jim Hamre, a retired civil engineer with the state Transportation Department, and Zack Willhoite, a customer service employee at a local transit agency.

"It's pretty devastating. We're having a tough time," said All Aboard Washington executive director Lloyd Flem.

In 2015, an Amtrak train traveling at twice the 50 mph (80 kph) speed limit derailed along a sharp curve in Philadelphia, killing eight people. Investigators concluded the engineer was distracted by reports over the radio of another train getting hit by a rock.

Amtrak agreed to pay $265 million to settle claims filed by the victims and their families. It has also installed positive train control on all its track between Boston and Washington.

___

Balsamo reported from Los Angeles. Associated Press writers Phuong Le and Sally Ho in Seattle, Michael Sisak in Philadelphia, Gillian Flaccus in Portland, Rachel La Corte in Olympia, Washington and Manuel Valdes in Dupont contributed to this report.

___

For complete coverage of the deadly derailment, click here: https://www.apnews.com/tag/TrainDerailment

This article was written by Haven Daley and Michael Balsamo from The Associated Press and was legally licensed through the NewsCred publisher network. Please direct all licensing questions to legal@newscred.com.

Official: Train Brake Automatically Activated in Fatal Wreck

Related Stories